Micro switch is to complete the work without using too much force in the process of clicking. In terms of touch effect, this product can bring people a very good experience. Micro switch are divided into a lot of kinds on its types, whether it is in accordance with the size, power, or internal building can be divided into many types, but on the application effect is roughly the same, on the production principle is the same, the key is to satisfactory to the sensitive, the most critical is the sensitive degree of electronic products. Of course, in the process of cooperation with electronic products enterprises to timely receive the return of products, so that they can be clear about their switch in the process of use will not appear any problems? Circuit short is a functional error. At the same time, it should be noted that the line connection should be completely welded. The whole operation should be completed in the factory in the shortest time, and the welding should be completed in three seconds, so as not to burn the switch and lead to a decrease in sensitivity.

<Published on2022-09-06>

In the field of electronic products, the use frequency of Tact switch is very strong, then need the best quality products in the shrapnel, especially in a line contact problem need to be the best guarantee, manufacturers in the process of delivery will need to ensure product quality, at the same time should pay attention to when using gasket produce sound is very normal thing, In particular, the reed must have a ticking sound in the process of touching, so as long as you pay attention to the strength of the whole link.

For the selection of reed, you need to select the type according to the four corners. Since the circuit can be connected only by touching the tact switch, people need to have a certain grasp of the force in the whole process, and should not exert too much force, which will cause bad effects on the reed.

Tact switch contact while in the process of application is more sensitive, but if you use too much efforts, beyond the scope of it to withstand natural product damage caused by the pressure, at the same time the need to pay attention to replace the switch is to pay attention to the line connection is correct, the first is the touchpad is connected correctly, and then is used in pressure range on whether need to adjust, Generally speaking, the use of the tact switch will not be too hard, which will cause problems to the metal reed, and the loose contact will naturally cause uncontrollable consequences to the product. Generally, the service life of the product is controlled by the switch, so special attention should be paid to the use process.

The metal reed is the core of the tact switch, and the sound of the reed will be relatively clear in the process of touching. Of course, most of the current electronic product market has improved the reed, but the overall operation process is still similar. In terms of installation, as long as attention is paid to the wiring problem, good results can be achieved.

<Published on2022-09-06>

Phosphor bronze and brass are two major classes of copper alloys. The difference lies in the composition performance and use of different.

Brass: Brass is an alloy of copper and zinc. If brass is only made of copper and zinc, it is called common brass. If it is made up of more than two elements, it is called special brass. Such as copper alloy composed of lead, tin, manganese, nickel, lead, iron and silicon. Brass has strong wear resistance. Phosphor bronze is a kind of bronze with tin and phosphorus as its main alloying elements.

Phosphor bronze has higher corrosion resistance, wear resistance, impact does not spark. Used for medium speed and heavy load bearing, the maximum working temperature is 250℃. With automatic allocating, not sensitive to deflection, bearing force uniform bearing capacity, can be radial load at the same time, self-lubrication without maintenance and other characteristics. Tin phosphor bronze is a kind of alloy copper. It has good electrical conductivity, is not easy to heat, ensures safety and has strong fatigue resistance. Tin phosphor bronze's electrical structure, no rivet connection or frictionless contact, can ensure good contact, good elasticity, smooth insertion. The alloy has excellent machining properties and chip forming properties, and can quickly shorten the machining time of parts. Phosphor bronze is also commonly used as a sound reed material for harmonica. 

<Published on2022-09-06>